Payment & Shipping Terms:
|Barerel Material:||Alloy Steel||Cable Diameter:||10-70mm|
|Production Length:||32m||Material:||Pvc Pe|
100 m/min Cable Extrusion Machine,
155kw Cable Extrusion Machine,
120 Cable Extrusion Line
Main features of machine
This equipment is applicable to outer surface extrusion of wires and cables for insulation materials such as PVC
1. Extrusion Wire Gauge:
1) Inlet Wire Diameter:
2) Finished Wire Diameter: Φ10 mm～Φ70mm
2. Applicable Material: PVC
3. Screw Diameter: Screw Diameter 120mm
4. Extrusion Capacity:max480 kg/h
5. Linear Velocity: 5～150m/min
6. Length of Production Line: 38Meters
7. Installed Capacity: About 155KWh
8. Color: Grass Green
List of machine
|1||Side-axis Pay-off Frame||1250-1500mm||1 set|
|2||Cover-type Tractor||800kg||1 set|
|3||Straighter||5 wheels||1 set|
|4||Extruder+cross head+PVC feeder||120mm||1 set|
|5||Electrical Control Box||PLC||1 set|
|6||Ink printing machine||1 set|
|7||Water Cooling Tank||20 meters||1 set|
|8||Drying Machine||1 set|
|9||Spark testing machine||1 set|
|10||Meter counting stand||1 set|
|11||Cover-type Tractor||1600KG||1 set|
|12||Side-axis Taking-up and Traversing Machine||1200-2500 mm||1 set|
Brand of parts
1. Motor is Siemens.
2.Temperature control: RKC
4. Touch screen: Siemens
Payment:60% as advance, 40% before shipping
Deliver time: 60 days after advance
Warranty:1.0year (start from the day when the machine is running in Customer’s factory)
120mm Extruder with cross head
Applicable Material: PVC, Plasticization degree of 100%.
Maximum Extrusion Capacity:260kg/hr.
Mechanical Center Height: 1000mm
Ratio of Length and Diameter: 1:25
Compression Ratio: 1:2.8
Rotation Rate of Screw: 0—60 RPM
Material of Screw: One Ø120mm screw with whole tooth nitrogen
treatment of alloy steel and chrome-plated polished surface and screw-passing cooling water device.
Material of Screw Cylinder: 38CrMoA1A alloy steel, nitrogen treatment and precisely grinding. The surface hardness inside the screw cylinder is R2-3 degree higher than that of the front surface of the screw and the screw thread. The cooling water jacket is added on the feed point of the screw cylinder.
Gearbox: Imitation of Italian-type, hardened helical gear gearbox, material of cast steel, oil-bath lubrication, tooth-face high-efficiency quenching and adoption of Japanese NACHI bearing.
Electric Heating: 380V, with even three-phase separated flow.
Screw cylinder electric heating zone 6, the cast aluminum heating ring heating is affixed with cooling air duct.
Head electric heating zone 1, heating by cast aluminum heating ring.
Neck electric zone 1, heating by the electro-thermal tablets.
Eye die electric heating zone 1, heating by the electro-thermal tablets.
Control of Temperature: Use the PID automatic temperature control gauge made in Yangming, Taiwan, automatically set the control under 0-399℃ and use KTYP as the thermal-couple.
Cooling: Screw cylinder zone 6, use 6 sets of cooling fans (550W).
Head: Right-angle adjustable eccentric head.
Host Motor: The motor drags with 90 KW. The inverter controls and unloads by synchronization. The velocity adjustment is convenient and steadily operated.
Contact Person: admin